Possibilities of improving the safety of rail vehicles with independently rotating wheels
Yevhen Myhajlov, Stanislav Semenov, Yan Dizho, Miroslav BlatnitskyOne of the promising ways to achieve high speed and smooth running of rail vehicles during stable movement in straight sections of the track and to improve the characteristics of fitting the vehicles in a curve is the use of independently rotating wheels in their running parts. Such undercarriages are already becoming quite widespread, for example, in urban rail transport vehicles. But independently rotating wheels can rotate in a wheel pair around a common axis with different angular velocities. It follows that during their movement, longitudinal creep forces do not arise, which form the controlling moment and center the wheel pair in the rail track. This can lead to increased angles of attack of the wheels on the rails, increased lateral forces and accelerated wear of the wheels and rails. In turn, this increases the tendency of vehicles with independently rotating wheels to derail by rolling the flange onto the head of the rail.
The accumulated global experience of operating similar vehicles confirms this. To overcome the mentioned disadvantages of independently rotating wheels, a number of various technical solutions have been proposed. Some of them relate to ensuring the given elastic-dissipative characteristic of the torsional articulation of the wheels in a wheel pair. A promising direction is the improvement of the characteristics of the connections of wheel pairs with the bogye and bogyes with the vehicle body, the use of mechatronic systems for controlling the position of the wheel pairs in the horizontal plane for their radial installation in curved sections of the track. In this work, attention is paid to the issue of the use in the design of independently rotating wheels of a perspective design scheme that allows independent rotation of the wheel's support surface and its guide surface (flange). The question of the effect of changing the design scheme of the wheel on the safety of movement due to the roll-in of the ridge on the rail head was considered.
The influence of a promising design scheme of a wheel in comparison with a traditional design scheme of a wheel on the safety of driving down a rails was investigated. The peculiarities of the distribution of frictional forces in the ridge contact during movement along the rails of the wheels of both design schemes are analyzed. For a wheel of a traditional design scheme, the module and the direction of the friction force vector in the ridge contact are uniquely determined by the geometric characteristics of the contact between the wheel and the rail and the angular speed of the wheel rotation. At the same time, when the wheel of the prospective design scheme moves, the direction and module of the friction force vector of the ridge on the rail also depend on the ratio of the angular velocities of rotation of the supporting surface of the wheel and its guiding surface (flange) around the common axis. The obtained results allow us to draw a conclusion about the expediency of using a promising design scheme in independently rotating wheels to increase the safety of movement of rail vehicles
References
[1] Dukkipati, R.V., Swamy, S.N., & Osman, M.O. (1992). Independently rotating wheel systems for railway vehicles – A state-of-the-art review. Vehicle System Dynamics, 21(5), 297-330. doi: 10.1080/00423119208969013.
[2] Liang, B., & Iwnicki, S.D. (2007). An experimental study of independently rotating wheels for railway vehicles. In IEEE Proc. international conference on mechatronics and automation (pp. 2282-2286). Harbin: IEEE. doi: 10.1109/ICMA.2007.4303908.
[3]. Zaazaa, K.E., & Whitten, B. (2007). Effect of independently rotating wheels on the dynamic performance of railroad vehicles. In Рroceedings of the ASME International Mechanical Engineering Congress and Exposition (Vol. 16, pp. 467-477). Washington: ASME. doi: 10.1115/IMECE2007-43645.
[4] Farhat, N., Ward, C., Shaebi, O., Crosbee, D., Stow, J., Wang, R., Goodall, R., & Whitley, M. (2020). Controlling a rail vehicle with independently-rotating wheels. In: M. Klomp, F. Bruzelius, J. Nielsen & A. Hillemyr (Eds.), Advances in dynamics of vehicles on roads and tracks. IAVSD 2019. Lecture notes in mechanical engineering (pp. 31-39). Cham: Springer. doi: 10.1007/978-3-030-38077-9_4.
[5] Bracciali, A. (2016). Railway wheelsets: History, research and developments. International Journal of Railway Technology, 5(1), 23-52. doi: 10.4203/ijrt.5.1.2.
[6] Goodall, R., & Li, H. (2000). Solid axle and independently-rotating railway wheelsets – a control engineering assessment of stability. Vehicle System Dynamics, 33(1), 57-67. doi: 10.1076/0042-3114(200001)33:1;1-5;FT057.
[7] Bracciali, A., & Megna, G. (2016). Contact mechanics issues of a vehicle equipped with partially independently rotating wheelsets. Wear, 366-367, 233-240. doi: 10.1016/j.wear.2016.03.037.
[8] Perez, J., Busturia, J.M., Mei, T.X., & Vinolas, J. (2004). Combined active steering and traction for mechatronic bogie vehicles with independently rotating wheels. Annual Reviews in Control, 28, 207-217. doi: 10.1016/j.arcontrol.2004.02.004.
[9] Kapitsa, M., Mikhailov, E., Kliuiev, S., Semenov, S., & Kovtanets, M. (2019). Study of rail vehicles movement characteristics improvement in curves using fuzzy logic mechatronic systems. MATEC Web of Conferences, 294, article number 03019.doi: 10.1051/matecconf/201929403019.
[10] Mikhailov, E., Gerlici, J., Kliuiev, S., Semenov, S., Lack, T., & Kravchenko, K. (2019). Mechatronic system of control position of wheel pairs by railway vehicles in the rail track. AIP Conference Proceedings, 2198, article number 020009. doi: 10.1063/1.5140870.
[11] Fu, B., Giossi, R.L., Persson, R., Stichel, S., Bruni, S., & Goodall, R. (2020). Active suspension in railway vehicles: a literature survey. Railway Engineering Science, 28, 3-35. doi: 10.1007/s40534-020-00207-w.
[12] Upadhyay, R. (2000). Reduced wear wheels and railshyay. International Railway Journal, 7, 33-34.
[13] Wilson, N., Shu, X., & Kramp, K. (2008). Effects of independently rolling wheels on flange climb derailment. In ASME 2004 international mechanical engineering congress and exposition: IMECE2004-60293 (pp. 21-27). Anaheim: ASME. doi: 10.1115/IMECE2004-60293.
[14] Opala, M. (2016). Study of the derailment safety index Y/Q of the low-floor tram bogies with different types of guidance of independently rotating wheels. Archives of Transport, 38(2), 39-47. doi: 10.5604/08669546.1218792.
[15] Shen, G., Zhou, J., & Ren, L. (2006). Enhancing the resistance to derailment and side-wear for a tramway vehicle with independently rotating wheels. Vehicle System Dynamics, 44(1), 641-651. doi: 10.1080/00423110600882738.
[16] Wu H., & Wilson N. (2006). Railway vehicle derailment and prevention. In S. Inwicki (Ed.), Handbook of railway vehicle dynamics (pp. 209-238). London: Taylor & Francis.
[17] Xu, J., Wang, J., Wang, P., Chen, J., Gao, Y., Chen, R., & Xie, K. (2019). Study on the derailment behaviour of a railway wheelset with solid axles in a railway turnout. Vehicle System Dynamics, 58(1), 123-143. doi: 10.1080/00423114.2019.1566558.
[18] Mikhailov, E., Semenov, S., Sapronova, S., & Tkachenko, V. (2020). On the issue of wheel flange sliding along the rail. In K. Gopalakrishnan, O. Prentkovskis, I. Jackiva & R. Junevičius (Eds.), TRANSBALTICA XI: Transportation science and technology. Lecture notes in intelligent transportation and infrastructure (pp. 377-385). Cham: Springer. doi: 10.1007/978-3-030-38666-5_40.
[19] Dukkipati, R. (2000). Vehicle dynamics. New Delhi: Narosa Publishing House.
[20] Mikhailov, E., Semenov, S., Tkachenko, V., & Sapronova, S. (2018). Reduction of kinematic resistance to movement of the railway vehicles.In Horizons of railway transport 2018: Proceeding of 10th international scientific conference (Vol. 235, article number 00033). doi: /10.1051/matecconf/201823500033.
[21] Mikhailov, E., Semenov, S., Dižo, J., & Kravchenko, K. (2019). Research of possibilities of reducing the driving resistance of a railway vehicle by means of the wheel construction improvement. Transportation Research Procedia, 40, 831-838. doi: 10.1016/j.trpro.2019.07.117.
[22] Nadal, M.J. (1908). Locomotives a vapeur. Collection encyclopedie scientifique, biblioteque de mecanique appliquee et genie (Vol. 186). Paris: Octave DOIN & Fils.